Installing ceramic itself is easy! Follow these basic steps, and you can create floor designs you want. and you can Visit our website
- Use the right equipment.
- Prepare the subfloor before installing the tile.
- Layout your floor
- Install the tiles started!
Place the first tile at the intersection of two of the lines. Adhere to the subfloor by using thin set mortar or adhesive tiles you choose. The use of the notched trowel to affix the mortar is the best choice for installing ceramic tile. However, you can still use ordinary trowel if you do not have it. To fit the tile into place, press down while moving it back and forth to position the tiles firmly. If there is mortar or adhesive spilling out, use a trowel (or a wet sponge) to get rid of it. Do this process until the next tile and so on, until you have installed.
Filling the sidelines tiles
Once installed ceramic tile, filling time between tiles with grout. Grout is the material made of cement, sand, water, and a little color. He used to fill in between the tiles and tape it. Grout is available in different colors and you can choose which matches the color of the tiles. Use rubber grout float and enter the grout into the gaps between the tiles. Use the grout float at an angle such that you can fill the gap by as much grout.
After filling the grout in between the tiles, use a damp sponge to clean the excess grout. Rinse the sponge to dissolve the excess grout so that each tile is kept clean. You can put a sealant on the grout lines after the grout dries. And you’re done! Learn how to install ceramic tile is easy! By following these basic steps, you too can realize your ceramic floor design. Learn how to install ceramic floor properly will give satisfaction to the job well done, and a beautiful tiled floors.